Friday, October 29, 2010


Calcium Chloride Test Kit - 100 Pack

In need of a lot of Calcium Chloride Test kits? Look no further to save yourself time and money by purchasing these kits in bulk.

Some may know this test as the dome test.  The dome test is a way to measure the amount of moisture emitted from the surface of a concrete slab.  It takes roughly a period of 60-72 hours to run these tests. For new construction, ASTM requires 3 tests for the first 1000 square feet and one test for each additional 1000 square feet. Also along with every moisture test you run, you should be sure to run the alkalinity PH test.

If a bulk pack of 100 test is too much and you only require a few or you simply wish to learn more about how to do these test and to learn more about this product, click here.

Sunday, October 24, 2010


Rodia Demolition Hamer MH55

The Rodia Demolition Hammer MH55 is a powerful Demolition Hammer that will allow you to remove or break tile, concrete, masonry, stone breaking and chiseling.

A SDS Max Tool System on the Demolition Hammer allows for a tool free chisel change, automatic tool locking, dust protection and optimal impact energy transfer rate. The MH55 Demolition Hammer is also equipped with a padded, shock absorbing rear handle and 360 degree auxiliary handle giving a comfortable grip when chiseling.

The Demolition Hammer comes with a carrying case, but the chisels are sold separately. You can find out more about the Demolition Hammer and chisels that is can use by clicking here.

Sunday, October 17, 2010


Rodia 3515RS - 60" Diamond Stone Wet Saw

The Rodia 3515RS is a 60" Diamond Tile Saw that is made out of Stainless Steel and is designed to produce fast and chip free cuts of very large tiles, stone slabs and slate.  These saws are equipped with a powerful 3HP direct drive motor with a plunge cutting capability that will cut the hardest of tiles.

These saws come with the following items:

The max cutting height on this saw is 4" and it has a 60" straight cutting length. You can also make miter cuts with this saw due to the tilt-able cutting head.

To learn more about this saw click here!

Sunday, October 10, 2010


Premium Tile Scoring Wheel - 1/4" (6mm)

1/4" Premium Rodia Scoring Wheels can be found at This 1/4" Rodia cutting wheel is designed for use with floor and wall tiles; offering a smooth cutting movement, thus providing you with less breakage.

This cutting wheel can be used with Rodia manual tile cutters. To find out more about this cutting wheel, click here.


4 Series Carpet Edge Sealing Tip

The Gundlach 4 Series Edge Sealing Tip has an opening on the left side of the tip, ideally designed for right handed use. This tip was designed to help easily seal the edges on carpet, with the use of any hot melt glue. The intentions of this Sealing Tip is to allow the carpet installer to make ideal seams without causing the edge of the carpet to fray.

To learn more about how to use this sealing tip and to see specific specs of the item, you can find it on by clicking here.

This page is powered by Blogger. Isn't yours?